0 prece(s) - €0,00
Grozs ir tukšs.


Zvaniet mums: (+372) 6 518 040

Yaseu FT-8900 VHF/UHF tranciever

Preces pieejamība: Nav noliktavā



9/50/144/430 MHz FM Transceiver

The FT-8900 is a ruggedly-built, high quality Quad Band FM transceiver providing 50 Watts of power output on the 29/50/144 MHz Amateur bands, and 35 Watts on the 430 MHz band. It includes leading-edge features like cross-band repeat, dual receive, VHF-UHF Full Duplex capability, and over 800 memory channels. And its 10-meter FM coverage brings the possibility of world-wide FM DX-ing to you on your drive in to work!

Key Features

Convenient Remote-Head Mounting Capability
Having trouble mounting your mobile radio in your compact car? With the FT-8900 and its optional YSK-8900 Separation Kit, mounting is a breeze even in the tightest locations. The YSK-8900 includes a 20’ (6 m) remote cable and a mounting bracket for the front panel, and the microphone jack is located on the side of the front panel, eliminating the need to run a separate cable.
Convenient Access to WIRES and other Internet-linking Systems
When six and ten meters are dead, you can still talk around the world with the FT-8900! The front panel provides easy access to any WIRES™ (Wide-coverage Internet Repeater Enhancement System) repeater, automatically sending the required single DTMF access code at the beginning of each transmission. And if you’re using another Internet linking system, one that requires a DTMF string to being up the link, you can easily configure the FT-8900 to store and send the required tone sequence, as well!
Quad Band Operation
The FT-8900 combines the “traditional” 144/430 MHz local-communications concept with the exciting capability for Sporadic-E or F2 DX on the 29 MHz and 50 MHz bands, for nationwide or worldwide FM communications from your car! The first Amateur Radio FM mobile transceiver providing this capability, the FT-8900 will make you wonder how you got by with a two-band transceiver up to now!
Wide Frequency Coverage
The FT-8900 provides extended receiver coverage beyond the Amateur bands, so you can keep informed of communication activities in the public safety, commercial, aircraft, and government communications ranges. Included is coverage of 28-29.7 MHz, 50-54 MHz, 108-180 MHz, 300-480 MHz, and 700-985 MHz (cellular frequencies are blocked and non-restorable).
High Power Output
To get your message through when it counts, the FT-8900 puts out a full 50 Watts of power on the 29/50/144 MHz bands, and 35 Watts on 430 MHz. To ensure thermal stability during long transmissions, a thermal sensor monitors heat sink temperature, engaging the rear panel’s cooling fan only when needed.
Over 800 Memory Channels
The FT-8900 provides a wide variety of memory resources, including 799 “regular” memories, six “Home” channels for favorite frequencies, five sets of band-edge memories, and six “Hyper Memory” memories, which store complete transceiver operating status, for maximum operating efficiency and convenience. Six-character Alpha-Numeric “Tags” (labels) may be appended to memory channels, affording instant channel identification. No transceiver can compare with the memory capability of the FT-8900!
Cross-Band Repeat Capability
For emergency work, or to extend the range of a hand-held unit, the FT-8900 includes Cross-Band Repeat capability, similar to that pioneered on our popular FT-8100 Dual Band FM Mobile!
One-Touch Band-Pattern
To save valuable time while operating a transceiver with the versatility of the FT-8900, the “Hyper Memory” feature allows you to store a complete set of configuration data for the two bands on which you’re operating. Besides the usual storage of frequency and tone data, Hyper Memory will store such setup parameters as Automatic Repeater Shift status, Packet parameters, Scanning mode, and VFO tracking, avoiding the need to change each of these functions manually on a regular basis.
CTCSS and DCS Encoders Built In
Providing excellent performance even under difficult link conditions, Yaesu’s 50-tone sub-audible CTCSS and 104-tone DCS signaling systems ensure that you have full access to repeater and remote-base inputs, and the built-in CTCSS/DCS decoders allow silent listening on busy channels. Plus you get Tone Search Scanning, which will scan for the tone being received on an incoming signal, allowing you to match tones quickly when operating on a new repeater system.
Easy Setup for FM Satellite Operation
For operating on FM satellites like UO-14, the versatile memory system of the FT-8900 allows you to store a set of uplink and downlink frequencies that account for Doppler shift over the entire horizon-to-horizon pass, allowing you to ѕelect the optimum uplink/downlink combination effortlessly!
Truly Independent Two-Channel Operation
Basically operating as two radios in one, the FT-8900 may be configured in a number of ways. For example, you can set up the "left" side of the rig for operation on 29, 50, 144, or 430 MHz operation, while setting the "right" side either to 144 MHz or 430 MHz. And, if you like, you can configure the FT-8900R for 144-144 MHz or 430-430 MHz Dual Receive operation, so you´ll never miss out on the action!
ARTS (Auto-Range Transponder System)
Included in the FT-8900 is Yaesu´s exclusive ARTS™ feature, which can be critically important in search-and-rescue applications. ARTS™ provides a "hand-shake" with other ARTS™-equipped transceivers, and the display indicates if an "Out of Range" condition exists. The Base Station can then alert the field unit to move to a better location.
Many more features are included, to name a few:

  • 1200.9600 Packet Capability

  • RF Squelch

  • Automatic Power Off

  • Time-Out Timer

  • Battery Voltage Meter

  • DTMF Auto-Dial Memory

The left and right sides have their own Volume and Squelch controls, as well as S-Meters, so your operating preferences are never compromised.





Frequency Range


28.000 - 29.700 MHz

50.000 - 54.000 MHz

108.000 - 180.000 MHz

320.000 - 480.000 MHz

700.000 - 985.000 MHz


28.000 - 29.700 MHz

50.000 - 54.000 MHz

144.000 - 146.000 MHz

430.000 - 440.000 MHz

Channel Steps

5/10/12.5/15/20/25/50 kHz

Modes of Emission

F1, F2, F3

Antenna Impedance

50Ω, unbalanced (Antenna Duplexer Built-in)

Frequency Stability

±5ppm @-10ºC to +60ºC

Operating Temperature Range

-20ºC to +60ºC

Supply Voltage

13.8 VDC (±15%), Negative Ground

Current Consumption

RX: 0.5 A (Squelched)

TX: 8.0 A (50/420MHz), 8.5 A (29/144 MHz)

Case Size (W x H x D, mm)

140 x 41.5 x 168 (w/o knobs & connectors)

Weight (approx, g)

1000 (1kg)


Output Power

5/10/20/50 W (29/50/144 MHz)

5/10/20/35 W (430 MHz)

Modulation Type

Variable Reactance

Maximum Deviation

±5 kHz

Spurious Radiation

Better than -60 dB (29 MHz;Better than -50 dB)

Modulation Distortion

Less than 3%

Microphone Impedance

2 kΩ

DATA Jack Impedance

10 kΩ


Circuit Type

Double-conversion superheterodyne

Intermediate Frequencies (IF)

45.05 MHz / 450 MHz (Left Band)

47.25 MHz / 450 MHZ (Right Band)

Sensitivity (for 12 dB SINAD)

Better than 0.2 µV

Squelch Sensitivity

Better than 0.16 µV

Ѕelectivity (-6 dB / -60 db)

12 kHz / 30 kHz

Maximum AF Output

2W @ 8Ω for 5% THD

AF Output Impedance

4 - 16 Ω

More Info

User Manual (in English)

Papildus informācija

Piegāde paku mašīnā
Artikuls WI23
Choose brand Yaesu
Piegādātāja kods FT-8900
Radiostacijas tips Mobilā
Sobivad saatjatele

Preces birkas

Lietojiet atstarpes, lai atdalītu birkas, apostrofus lai sagrupētu frāzēs.

* Obilgāti aizpildāmie lauki